As far as I know, Kicad doesn't have such a functionality. But you can disable "magnetic pads" to avoid this problem.(Preferences --> General options --> Magnetic pads --> never)
Regards Remy. --- In [email protected], "klemen_dovrtel" <[EMAIL PROTECTED]> wrote: > > Even though you choose a finner grid, when you come close to a pin, > the cursor jumps to pin center, and the missing line is automatically > drawn under 45 degree angle. > > I think p-sad has a good solution for this problem. You can select the > way the lines are automatically drawn (90 degree angle, 45 degree > angle, radius) and you can also flip the line (this is also not > possible in kicad). > > Regards > Klemen > > > > > --- In [email protected], "Remy" <kicadder@> wrote: > > > > Hi, > > It is possible if you route the tracks manually.It may be useful to > > choose a finer grid. > > Remy > > > > > > > > --- In [email protected], "klemen_dovrtel" > > <klemen_dovrtel@> wrote: > > > > > > I would like to draw a pcb with horizontal and vertical lines only (no > > > lines under 45°). Is there an option to set that? Now kicad > > > automatically suggest lines under 45° angle which sometimes can't be > > > override. > > > > > > Regards > > > Klemen > > > > > >
