On Mon, Mar 23, 2009 at 12:44 PM, Andy Eskelson <[email protected]> wrote: > Please state: > the library, the device, and the pin name and pin numbers that you are > having problems with. then we can all look at the same thing.
Ok. Here's the chip I am using (uALFAT): <http://www.ghielectronics.com/product/1/> It is a LPC2103 with firmware for handling the FAT filesystem, so I modified the LPC210X part obtained from <http://library.oshec.org/compressed/all.tar.gz> Here's what the user manual for the uALFAT chip says: μALFAT uses UART, I2C or SPI to communicate with any external microcontroller. At power up, μALFAT samples SPI_SSEL# [pin 28] and SPI_SCK [pin 22] pins to determine what interface to use. The problem arises when I wire pins 22 and 28 to ground to indicate that I want to use the UART to communicate with the chip. Eeschema does not know that the pins are being used as input only, so it complains. -- Pertti ------------------------------------ Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please visit http://www.kicadlib.org for details of how to contribute your symbols/modules to the kicad library. For building Kicad from source and other development questions visit the kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/kicad-users/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/kicad-users/join (Yahoo! ID required) <*> To change settings via email: mailto:[email protected] mailto:[email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
