Thanks Andy!
--- In [email protected], Andy Eskelson <andyya...@...> wrote:
>
> All part of the same problem.
>
> The circles work on the current grid size.
> Right click and select grid, then choose a smaller grid size. You can
> then draw the circles as small as you like,
>
> Once drawn, right click on the line of the new circle and on the options
> select filled and you will get your dot.
>
> Hope this helps..
> Andy
>
>
>
>
> On Sun, 29 Mar 2009 22:24:05 -0000
> "Helms" <omnitec...@...> wrote:
>
> > Hello KiCad Users,
> >
> > I am trying to add the part ULN2803, 18 pin device, darlington driver
> > array. To draw it, its basically 8 inverters and 8 interconnected diodes.
> > I find no function to create the really small circles(for the inverters),
> > like the type on pins, nor the ability to place connection dots on wires,
> > such as the wire function in the Schematic editor. Am I overlooking these
> > important functions? Are there work-arounds?
> >
> >
> >
> > ------------------------------------
> >
> > Please read the Kicad FAQ in the group files section before posting your
> > question.
> > Please post your bug reports here. They will be picked up by the creator of
> > Kicad.
> > Please visit http://www.kicadlib.org for details of how to contribute your
> > symbols/modules to the kicad library.
> > For building Kicad from source and other development questions visit the
> > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups
> > Links
> >
> >
> >
>
