I guess that will work for the drill chart. Thanks to Andy and Alain.
Bruno --- In [email protected], "Alain M." <ala...@...> wrote: > > There is an automatic way that is just fine: > Menu > Post-process > Create drill diagram (2nd opt) > Drill diagram > (top center), I use Postcript. > > It will automaiicaly generate a sympol for each drill size and a list > and count at the bottom. > > Alain > > Andy Eskelson escreveu: > >>From the plot menu, if you select postscript as the output format you can > > select a small drill point on the pads rather than the real drill size. > > Not a X as you are used to, but it might be good enough. > > > > Andy > > > > > > > > On Fri, 03 Apr 2009 13:19:30 -0000 > > "evlotus7" <btre...@...> wrote: > > > >> Hi, > >> > >> As many of you, I'm a beginner to KiCad. But I know it for a couple of > >> years, especially EESchema that I used to draw schematics before > >> transferring them to the PCB designer. Now in my new job, I'm doing all > >> the design. > >> > >> I almost finished my first board and I got a question about drilling. I'm > >> use to see a drill chart with the PCB and different little cross symbol on > >> the board layout marking the position and size of each holes. Do I have to > >> draw and place by hand each cross on a layer (drawings, comments, Eco1 or > >> Eco2) or is there a more automatic way? > >> > >> > >> Bruno > >> > >> > >> > >> ------------------------------------ > >> > >> Please read the Kicad FAQ in the group files section before posting your > >> question. > >> Please post your bug reports here. They will be picked up by the creator > >> of Kicad. > >> Please visit http://www.kicadlib.org for details of how to contribute your > >> symbols/modules to the kicad library. > >> For building Kicad from source and other development questions visit the > >> kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! > >> Groups Links > >> > >> > >> > > > > > > ------------------------------------ > > > > Please read the Kicad FAQ in the group files section before posting your > > question. > > Please post your bug reports here. They will be picked up by the creator of > > Kicad. > > Please visit http://www.kicadlib.org for details of how to contribute your > > symbols/modules to the kicad library. > > For building Kicad from source and other development questions visit the > > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups > > Links > > > > > > > > > > >
