Many thanks for your answer Andy. Humm I understood the issue .
I got the library from: http://library.oshec.org/ And I understood that the issue was not to have taken the correct module In CVpcb, I made the relation: USB-MB-H ---> USB_A Which was wrong So after change it to USB-MB-H ---> con-usb-USB-MB-H It works fine Now to my remarks What is a little bit worrisome, is that there is no message indicating this kind off "not connection", or false component association .. Could be perhaps an evolution in a future Kicad version, especially for CVpcb. How could we inform the developer of this kind of issue, or needed evolution ? Very best regards Christian --- In [email protected], Andy Eskelson <andyya...@...> wrote: > > where did you get the lib and module from? > > > If the lib and modules do not match then all sorts of things can go > wrong. > > Using the standard KiCad libs (in the connector library) The netlist > gives: > > # EESchema Netlist Version 1.1 created Thu 23 Apr 2009 00:51:19 BST > ( > ( /49EFAB7E USB_A J1 USB_1 > ( 1 N-000002 ) > ( 2 N-000003 ) > ( 3 N-000003 ) > ( 4 N-000002 ) > ( 5 N-000003 ) > ( 6 N-000002 ) > ) > ( /49EFAD07 USB_B J2 USB_2 > ( 1 N-000001 ) > ( 2 N-000001 ) > ( 3 N-000004 ) > ( 4 N-000004 ) > ) > ) > > > For USB1 / 2 types. > Quite a bit different from yours. So if you are using the Kicad modules > and your lib then I think will be the problem. > > The problem is normally that the pin numbers / identifiers don't match In > the kicad parts they are expecting pins called 1,2,3,4,5,6 etc, in your > lib they are called VBUS, D-, D+ GND. So this is the first area to check > out. > > Andy > > > > > > > > > > On Wed, 22 Apr 2009 23:17:24 -0000 > "cklckl67" <cklck...@...> wrote: > > > Dear Kicad users, > > > > I have a great issue with PCBNEW > > > > My Netlist seems to be OK. > > I have 1 usb connector declared in my Netlist as: > > > > ( /49BD6464/49D3D7F2/4973DEB3 con-usb-3-USB-MB-H X1 USB-MB-H {Lib=USB-MB-H} > > ( VBUS +5USB ) > > ( D- N-000064 ) > > ( D+ N-000070 ) > > ( GND GND_PC ) > > ) > > > > We can see that the 4 pins are connected. > > > > But in PCBNEW, my USB connector have no connection to other components. > > When I zoom on my USB connector, I can see that all the connection are > > barred (X). > > Please could you explain me where is the issue ? > > > > How can I check (without to take a look on each my component) that this > > issue exists on another place of my PCB > > > > Thanks in advance > > > > Christian > > > > > > > > > > ------------------------------------ > > > > Please read the Kicad FAQ in the group files section before posting your > > question. > > Please post your bug reports here. They will be picked up by the creator of > > Kicad. > > Please visit http://www.kicadlib.org for details of how to contribute your > > symbols/modules to the kicad library. > > For building Kicad from source and other development questions visit the > > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups > > Links > > > > > > >
