Thanks a lot!!
I'll test it asap!
It could be fine to put these informations in the pdf or elsewhere
Talk soon
// from iPhone
Le 17 mai 09 à 23:37, Brian Sidebotham <brian.sidebot...@gmail.com> a
écrit :
Hi Julien,
It looks like a problem with your designators. A while back a problem
was fixed with the specctra import where a component name began with a
number instead of an alphabetical character. So your component 1pin
should now parse correctly.
I think your problem is with the reference designators for your
component 1pin, they have no designator portion, only the number is
present. So your 1pin component designators are for example 1, 2, 3,
4, 5, etc. instead of something sane like J1, J2, J3, J4, J5, etc.
Unfortunately I'm on a plane tomorrow and am packing now so I don't
have the time to look at this any further, but I'm sure you can fix
this by making sure your 1pin reference designators start with at
least one alphabetical character (a-z)
The KiCad autorouter is currently not as good as the freerouter.net
version, so I would suggest using the freerouter version at the moment
and importing the specctra session back into kicad as your are trying
to do if you intend to autoroute boards.
Best Regards,
Brian Sidebotham.
2009/5/17 Julien Bayle <julien.ba...@gmail.com>:
> [Attachment(s) from Julien Bayle included below]
>
> hi Brian,
>
> here is the error message (in french, but I can translate it)
> here is the ses file from freerouting.net, too.
>
> I hope I can solve that ...
>
>
> as I wrote, I don't understand too why sometimes kicad doesn't
autoroute
> anything :-(
> if it does, I don't use freerouting.net anymore but ...
> Julien
>
>
> 2009/5/17 Brian Sidebotham <brian.sidebot...@gmail.com>
>>
>>
>> 2009/5/17 Julien Bayle <julien.ba...@gmail.com>:
>> > hi,
>> >
>> > I would want to autoroute my pcb.
>> > I tested native autorouter... on several pcb, it began to
autoroute and
>> > finished . on some other, it didn't start and just displayed
the whole
>> > unrouted wires.
>> >
>> > so, I tested freerouting.net
>> > it works everytime and it is pretty good!
>> > BUT, how to use the result from freerouting.net to kicad to
finish my
>> > pcb ??
>> >
>> > I tried to save the file as a session specctra file (.ses) but
when I'm
>> > trying to import it in kiCad, there is an error message (expected
>> > component_id at line 7 etc etc)
>> >
>> > how can I solve my problem??
>> >
>> > cheers,
>> > julien
>>
>> Hi Julien,
>>
>> It sounds like you are doing the right thing, so please post up the
>> exact error message you get, and if possible attach your specctra
>> session file. I'm sure someone will be able to help you further
from
>> there.
>>
>> Best Regards,
>>
>> Brian Sidebotham.
>
>
> Attachment(s) from Julien Bayle
>
> 1 of 1 Photo(s)
>
> error.jpg
>
> 1 of 1 File(s)
>
> PCB1.ses
>
