You can use the save block command. 1) Open the design (file) to be copied. 2) Select the area that you want to copy with the mouse 3) Click in the right button, after done the selection 4) Choose the option Other Blocks Commands>Save Block 5) Open the file where you want 6) Click in the Paste icon (10th , hight top, left to right) 7) Move the mouse to center sheet 8) Left click where you want to let the copied circuit.
Bye. Nil einazaki668 wrote: > > > I ran into a situation in eeschema where I needed to copy a block > from one sheet to another. The FAQ says to select the block and > choose "Delete Block" from the "Other Block Commands" menu. This > appears to be wrong. When I followed the directions in the FAQ > (as best I could) the "Paste" button was always grayed out (in the > destination shematic). > > However, choosing "Save Block" instead seems to do the trick. > > I would ask that someone who's had more experience with Kicad > replicate my findings and, if needed, update the FAQ. > > Regards, > eric > >
