Two 1k resistors and a 47k resistor are already connected by traces (including the highlighted net connecting the right 1k resistor to the upper pin of the 47k resistor.
I looks like you might be trying to add a new connection to the net list between the upper pin of the 47k resistor to the right pin of the left 1k resistor. This connection already exists (shown as a trace below). The error might be because this new net would produce multiple connections to those pins. Sometimes these multiple connections are desirable. Maybe look at *.net at net N-000011. Is this a single sided board? ...Jim H. ----- Original Message ----- From: rick.hunter49 To: [email protected] Sent: Monday, September 07, 2009 2:32 AM Subject: [kicad-users] Kicad-pcbnew and ErrType(14) Hello all, I have a problem with Kicad. I need to connect 3 pins together but when I try to connect to the third, I get the following error message : "ErrType(14)- Two track ends". Please see screenshot 1.png and 2.png for more details in http://groups.yahoo.com/group/kicad-users/photos/album/1537359267/pic/list?mode=tn&order=ordinal&start=1&dir=asc. So I did "Netlist Dialog" -> "Rebuild board connectivity". Without success. As you can see on the 3.jpg, I use the Kicad SVN of 28 of August 2009. I update my local SVN tree almost every week-ends but nothing changes. Do you have an idea ? Thanks for your support, Kicad is the better GPL Electronic pcb editor for GNU/Linux of the world !
