Thanks I think I got it grounds are power_in labeled. So they would also need a power flag.
--- In [email protected], Andy Eskelson <andyya...@...> wrote: > > You are not the only one confused :-) > > You said: > " I set my grounds on chip pins to inputs to satisfy a DRC check" > > So I assumed that you do have some ground pins. > > > Take a look at the 7400 in the lib editor as an example to follow. > Look at pin 7 which is grey as it is set to NO Draw. > Select the pin and right click then bring up the properties. > The pin name is GND, this is the SAME name as one of the power ports, in > this case GND. It is of type Power In. > > A GND power net will now automatically connect to this pin. > The GNBD net will need to be "energised" so thats when you add the power > flag to the net. > > > Is that what you needed ? > > Andy > > > > > > > > > On Thu, 17 Sep 2009 12:34:59 -0000 > "josh_eeg" <josh...@...> wrote: > > > leave the grounds as ground??? Their is no groud option for pins??? I am > > now confused. > > > > --- In [email protected], Andy Eskelson <andyyahoo@> wrote: > > > > > > leave the grounds as grounds and ensure that you have a power flag on the > > > ground net. > > > > > > > > > Andy > > > > > > On Wed, 16 Sep 2009 19:43:13 -0000 > > > "josh_eeg" <josheeg@> wrote: > > > > > > > I set my grounds on chip pins to inputs to satisfy a DRC check is their > > > > a better thing to set them as? > > > > A discription of where to use the different settings was not clear to > > > > me. > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > Please read the Kicad FAQ in the group files section before posting > > > > your question. > > > > Please post your bug reports here. They will be picked up by the > > > > creator of Kicad. > > > > Please visit http://www.kicadlib.org for details of how to contribute > > > > your symbols/modules to the kicad library. > > > > For building Kicad from source and other development questions visit > > > > the kicad-devel group at > > > > http://groups.yahoo.com/group/kicad-develYahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > Please read the Kicad FAQ in the group files section before posting your > > question. > > Please post your bug reports here. They will be picked up by the creator of > > Kicad. > > Please visit http://www.kicadlib.org for details of how to contribute your > > symbols/modules to the kicad library. > > For building Kicad from source and other development questions visit the > > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups > > Links > > > > > > >
