>From my albeit limited experience, as I have only done 3 boards, it depends on which direction you go from the pad. If you go straight out from the pad, the trace will be straigh out until you change direction, if you leave the pad at an angle, the trace will be at an angle.
Chris On Wed, Dec 2, 2009 at 6:22 AM, s_borshch <[email protected]>wrote: > > > Hello everybody. > > When placing trace from pad sometimes trace goes straight and then turns at > 45 degrees and sometimes trace goes first at 45 degrees and then straight. I > have no ideas how pcbnew selects one or other behavior. But the question is: > is there any hotkey or other way to change behavior on-the-fly, during > placing trace. > > Regards, > Sergey > > > -- IBA #15631
