My vias stay incorrect forever. They don't change to the proper via when I end the track tool. In faact, when I end the tool, I have to then select the via, select 'edit' and then select the alternate hole size.
--- In [email protected], Andy Eskelson <andyya...@...> wrote: > > It works OK here, BUT during track layout when you change layer or hit V > for a via, the via is shown the same width as the track. When you end the > track tool the vias then show the selected size. > > Andy > > > On Sun, 24 Jan 2010 22:24:31 -0000 > "giordano.george" <giordano.geo...@...> wrote: > > > When I place a via, the dimensions of the via don't match the dimensions in > > the pull-down menu for tracks and vias. The via has a 20mil hole and a > > 30mil overall diameter. Originally, the via had a 30mil hole and 30mil > > diameter. I corrected this but every new via still has the old dimensions. > > This requires me to edit every via and tell the tool to use the alternate > > dimensions (which I've preset to the same as the new default dimensions. > > Does anyone know how to get the tool to place the correct via with the > > correct dimensions? > > > > > > > > ------------------------------------ > > > > Please read the Kicad FAQ in the group files section before posting your > > question. > > Please post your bug reports here. They will be picked up by the creator of > > Kicad. > > Please visit http://www.kicadlib.org for details of how to contribute your > > symbols/modules to the kicad library. > > For building Kicad from source and other development questions visit the > > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups > > Links > > > > > > >
