--- In [email protected], "Thierry" <thie...@...> wrote: > > But I believe that all the fields could be included in the BOM in the > previously 2009-02-16 version? Is it correct? > > I am using 7 custom fields in addition to the standard ones and I kind of > remember to have verified that they were working before going through the > trouble of filling these fields in my custom libraries. > > > > Thierry > > > > --- In kicad-users@ <mailto:kicad-users%40yahoogroups.com> yahoogroups.com, > "MarkB" <mrb1618@> wrote: > > > > Hi folks, > > > > I have just completed my first schematic in Kicad and the capture went > well. I am generating a BOM and I am unable to generate a BOM that contains > the extra fields that I have told it to include. I have created a Digikey > part number field the I would like to have in the BOM. Any ideas what I > could be doing wrong? > > If you are using Single Part per Line, currently only > Field 1 thru 4 are supported. Sorry I just got lazy.. > I was only using the following: > * FIELD1 - manufacture > * FIELD2 - manufacture part number > * FIELD3 - distributor part number > easy fix, but I'm not sure when I will get to it! > > Frank Bennett > > > > I am running kicad 2010314. > > > > Thanks, > > > > Mark > > > If you have a suggestion as to what I am doing wrong I would appreciate it. I am going to the BOM dialog and selecting the fields that I am using. I am only getting the first few out in the generated BOM.
Mark
