I am working very hard on transfering my library and schematic from Eagle and have finally had a bit more luck today. I am indeed using the above mentioned ULP file. There still seem to be a couple of problems.
1. Kicad gags on ICs with more than one part for some reason and aborts drawing the rest of the schematic. 2. The components do not arrive in the correct orientation. 3. I had to change a line in the schematic ULP because it was changing "/" to "_" in the names of the components. I would appreciate it if somebody could help me with these problems. --- In [email protected], "Daniel Strang" <hi...@...> wrote: > > The schematic comes over without symbols or nets. So far we have been > unsuccessful in transferring a net file. > > -------Original Message------- > > From: Andy Eskelson > Date: 6-4-2010 11:55:42 > To: [email protected] > Subject: Re: [kicad-users] Convert from Eagle to Kicad > > > Have you found this script: > > http://www.cadsoft.de/cgi-bin/download > pl?page=/home/cadsoft/html_public/download.htm.en&dir=eagle/userfiles/ulp > > eagle2kicad_sch.ulp ? > > I don't know if it's any good, I don't use eagle . > > Andy > > On Sat, 3 Apr 2010 14:27:01 +0200 (West-Europa (zomertijd)) > "Daniel Strang" <hi...@...> wrote: > > > To Whom It May Concern: > > > > I have been forced to switch from Eagle to Kicad because of the limited > > board space allowed. It is my greatest hope that it will not be necessary > > to redo all of my schematic files. However, I have tried exhaustively all > > the ULP files etc. which I could find on the Internet and nothings seems > to > > work. This includes files which supposedly convert net files and schematic > > files. Can somebody please help me? > > > > Sincerely, > > Daniel > > > > > > > > ------------------------------------ > > > > Please read the Kicad FAQ in the group files section before posting your > question. > > Please post your bug reports here. They will be picked up by the creator > of Kicad. > > Please visit http://www.kicadlib.org for details of how to contribute your > symbols/modules to the kicad library. > > For building Kicad from source and other development questions visit the > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups > Links > > > > > > >
