Hi, Check if pin names are 1,2,3 on the component and A,B,C on the footprint. If so, change the footprint with the module editor (or the component with eeschema editor)
Pedro. > Did you run a DRC (Design Rules Check) on the schematic before moving the netlist to PCBNew? > > - Anders Gustafsson > Engineer, CNE6, ASE > Pedago, The Aaland Islands (N60 E20) > www.pedago.fi > phone +358 18 12060 > mobile +358 40506 7099 > fax +358 18 14060 > > > > >>> "bror" <[email protected]> 2010-04-22 19:19 >>> > Hello! Every body. > when I have med a schematic, and moved it to a PCB, and start to place the component on its place one the PCB. There is components that have no connections to other components. Way? > The components is TO-3`s. > > > ------------------------------------ Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please visit http://www.kicadlib.org for details of how to contribute your symbols/modules to the kicad library. For building Kicad from source and other development questions visit the kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/kicad-users/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/kicad-users/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
