For what I kno, this is a case where workint the "standad" track will make it easy:
If you have a schematic, just change the part in the schematic, then in cvpcb, then import the net usinf "replace parts" and the connections will not be lost :) Alain Em 03-05-2010 10:02, luck_hans escreveu: > For example i have two parts, connected with tracks, i remove these parts and > after readding these parts i want to connect them again to these tracks. The > tracks netname will then be something like 0 if i do remember well. Of course > i can switch of DRC an connect the tracks manually, but that wont change the > tracks netname, so it will keep giving me errors. > This is especially interesting for me since i design some Antenna-patterns > with it and want to change the used IC´s for certain designs. > > Anyway, back to topic. Since i have done the above mentioned workaround and > saved the project under a different name the error wont occur again for now. > I will send you the previous files and the actual files. > > Thanks a lot for your help! > I am working in a young startup-company and referring from my personal > experience with KiCad i could convince my bosses to give it a try. Uptil now > we are very satisfied and i hope we can contribute something back in future > too. > > > Regards > Patrick > >
