On Wednesday 05 May 2010 22:56:54 you wrote: > Hello Dan. > > > I have had many cards made at pcb houses as well. > > My problem started with a CNC milling machine and the conversion of Kicad > > gerber files to gcode. > > This means, the drill file for the board is ok, but you will get > broblems milling the outline? > Or does it mean, that you will get problems converting the tracks > outlines to a milling file for creating a board by milling the cooper > away than etching it? > > With best regards: Bernd Wiebus alias dl1eic
Drill file is probably OK. All the holes end up correctly when my pcb house do them. I'm having trouble converting the gerber code ( copper and component layers ) where the gcam software just dies in the KiCad code. Similar sized card with Eagle goes ok but there is a difference with the gerber code from KiCad. //Dan ------------------------------------ Please read the Kicad FAQ in the group files section before posting your question. Please post your bug reports here. They will be picked up by the creator of Kicad. Please visit http://www.kicadlib.org for details of how to contribute your symbols/modules to the kicad library. For building Kicad from source and other development questions visit the kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/kicad-users/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/kicad-users/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
