I've had crashes with components where the 3D .wrl was converted from .dxf to .wrl rather than created as a .wrl directly. But I suppose you've tried with an empty board or different components.
/A ________________________________ From: lynchaj <lync...@yahoo.com> To: kicad-users@yahoogroups.com Sent: Sat, June 19, 2010 6:48:55 PM Subject: [kicad-users] Re: PCBnew 3D viewer crashes Here is the debug log from Dr Watson: *----> State Dump for Thread Id 0xd48 <----* eax=026a05a0 ebx=026a05a0 ecx=00000000 edx=00000000 esi=00000000 edi=0023ede4 eip=00963720 esp=0023ec3c ebp=0023ec44 iopl=0 nv up ei pl zr na po nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246 *** ERROR: Symbol file could not be found. Defaulted to export symbols for C:\Program Files\KiCad\bin\wxmsw28u_gcc_custom.dll - function: wxmsw28u_gcc_custom!ZNK15wxHashTableBase5DoGetEll 0096370f 90 nop wxmsw28u_gcc_custom!ZNK15wxHashTableBase5DoGetEll: 00963710 55 push ebp 00963711 31d2 xor edx,edx 00963713 89e5 mov ebp,esp 00963715 56 push esi 00963716 53 push ebx 00963717 8b7508 mov esi,[ebp+0x8] 0096371a 8b4510 mov eax,[ebp+0x10] 0096371d 8b5d0c mov ebx,[ebp+0xc] FAULT ->00963720 f77608 div dword ptr [esi+0x8] ds:0023:00000008=???????? 00963723 8b4610 mov eax,[esi+0x10] 00963726 8b0490 mov eax,[eax+edx*4] 00963729 85c0 test eax,eax 0096372b 740f jz wxmsw28u_gcc_custom!ZNK15wxHashTableBase5DoGetEll+0x2c (0096373c) 0096372d 8b10 mov edx,[eax] 0096372f 89d0 mov eax,edx 00963731 395804 cmp [eax+0x4],ebx 00963734 740c jz wxmsw28u_gcc_custom!ZNK15wxHashTableBase5DoGetEll+0x32 (00963742) 00963736 8b00 mov eax,[eax] 00963738 39c2 cmp edx,eax *----> Stack Back Trace <----* WARNING: Stack unwind information not available. Following frames may be wrong. *** ERROR: Symbol file could not be found. Defaulted to export symbols for C:\WINDOWS\system32\USER32.dll - *** ERROR: Symbol file could not be found. Defaulted to export symbols for C:\WINDOWS\system32\ntdll.dll - *** ERROR: Symbol file could not be found. Defaulted to export symbols for C:\Program Files\KiCad\bin\wxmsw28u_gl_gcc_custom.dll - *** ERROR: Module load completed but symbols could not be loaded for C:\Program Files\KiCad\bin\pcbnew.exe *** ERROR: Symbol file could not be found. Defaulted to export symbols for C:\Program Files\KiCad\bin\wxbase28u_gcc_custom.dll - *** ERROR: Symbol file could not be found. Defaulted to export symbols for C:\Program Files\KiCad\bin\wxmsw28u_core_gcc_custom.dll - *** ERROR: Symbol file could not be found. Defaulted to export symbols for C:\WINDOWS\system32\kernel32.dll - ChildEBP RetAddr Args to Child 0023ec44 00a2ffb6 00000000 026a05a0 026a05a0 wxmsw28u_gcc_custom!ZNK15wxHashTableBase5DoGetEll+0x10 0023ec64 00a30181 026a05a0 00000da8 0023ecbc wxmsw28u_gcc_custom!Z19wxFindWinFromHandlePv+0x16 0023ec94 7e418734 026a05a0 00000081 00000000 wxmsw28u_gcc_custom!Z9wxWndProcP6HWND__jjl+0x21 0023ecc0 7e42bdf1 00a30160 026a05a0 00000081 USER32!GetDC+0x6d 0023ed28 7e428ea0 00000000 00a30160 026a05a0 USER32!UserLpkPSMTextOut+0x1cc 0023ed7c 7e42ce7c 013d5ed8 00000081 00000000 USER32!DefWindowProcW+0x180 0023edac 7c90e473 0023edbc 00000060 00000060 USER32!SetLayeredWindowAttributes+0x6a 0023f2bc 7e42e442 00000000 0023f340 0023f354 ntdll!KiUserCallbackDispatcher+0x13 0023f368 7e42d0d6 00000000 0310b864 0023f354 USER32!GetScrollInfo+0x460 0023f3a4 00a3a61b 00000000 0310b864 0310660c USER32!CreateWindowExW+0x33 0023f454 6c5c2700 0310d858 6c5d21b0 0310660c wxmsw28u_gcc_custom!ZN8wxWindow9MSWCreateEPKwS1_RK7wxPointRK6wxSizemm+0x14b 0023f494 6c5c3cb7 0310d858 01c98b90 ffffffff wxmsw28u_gl_gcc_custom!ZN10wxGLCanvas6CreateEP8wxWindowiRK7wxPointRK6wxSizelRK8wxString+0xd0 0023f534 006dff0b 0310d858 01c98b90 ffffffff wxmsw28u_gl_gcc_custom!ZN10wxGLCanvasC2EP8wxWindowiRK7wxPointRK6wxSizelRK8wxStringPiRK9wxPalette+0xe7 0023f5c4 006d5252 0310d858 01c98b90 0084c8e8 pcbnew+0x2dff0b 0023f894 00405b4f 01c98b90 01c4e2a0 0023f900 pcbnew+0x2d5252 0023f914 6fe7114f 01c4e2a0 0023fa20 000003e9 pcbnew+0x5b4f 0023f944 6fe71960 008b2568 01c4e2a0 0023fa20 wxbase28u_gcc_custom!ZN12wxEvtHandler21ProcessEventIfMatchesERK21wxEventTableEntryBasePS_R7wxEvent+0x4f 0023f974 6fe71c9b 008b2020 0023fa20 01c4e2a0 wxbase28u_gcc_custom!ZN16wxEventHashTable11HandleEventER7wxEventP12wxEvtHandler+0x60 0023f994 6fe71c3d 01c4e2a0 0023fa20 00000000 wxbase28u_gcc_custom!ZN12wxEvtHandler12ProcessEventER7wxEvent+0xab 0023f9b4 69605a13 01c4e468 0023fa20 ffffffff wxbase28u_gcc_custom!ZN12wxEvtHandler12ProcessEventER7wxEvent+0x4d 0023fa64 69581804 01c4e2a0 00001906 01ca0f58 wxmsw28u_core_gcc_custom!ZN11wxFrameBase14ProcessCommandEi+0x173 0023fa94 695837f3 01c4e2a0 00001906 00000000 wxmsw28u_core_gcc_custom!ZN7wxFrame13HandleCommandEttPv+0xb4 0023fad4 69549c15 01c4e2a0 00000111 00001906 wxmsw28u_core_gcc_custom!ZN7wxFrame13MSWWindowProcEjjl+0xd3 0023fb04 7e418734 03570652 00000111 00001906 wxmsw28u_core_gcc_custom!Z9wxWndProcP6HWND__jjl+0x55 0023fb30 7e418816 69549bc0 03570652 00000111 USER32!GetDC+0x6d 0023fb98 7e4189cd 00000000 69549bc0 03570652 USER32!GetDC+0x14f 0023fbf8 7e418a10 0023fc90 00000000 0023fc28 USER32!GetWindowLongW+0x127 0023fc08 6952772a 0023fc90 0023fc90 00000000 USER32!DispatchMessageW+0xf 0023fc28 69527a7b 01c75d58 0023fc90 00400000 wxmsw28u_core_gcc_custom!ZN11wxEventLoop14ProcessMessageEP6tagMSG+0x2a 0023fcb8 695f95ec 01c75d58 00400000 0023fd28 wxmsw28u_core_gcc_custom!ZN11wxEventLoop8DispatchEv+0x12b 0023fd28 695ca4da 01c75d58 00000000 00000000 wxmsw28u_core_gcc_custom!ZN17wxEventLoopManual3RunEv+0xdc 0023fda8 6fe04567 01c36298 01c36150 00000000 wxmsw28u_core_gcc_custom!ZN9wxAppBase8MainLoopEv+0x8a 0023fe08 6950766a 0023fea8 01c36150 00000002 wxbase28u_gcc_custom!Z12wxInitializeiPPw+0x1a7 0023feb8 0066b61c 00400000 00000000 00262338 wxmsw28u_core_gcc_custom!Z7wxEntryP11HINSTANCE__S0_Pci+0x18a 0023fed8 007b33e9 00400000 00000000 00262338 pcbnew+0x26b61c 0023ff58 004010a7 004012f0 007fd4b4 0023ff78 pcbnew+0x3b33e9 0023ffa0 00401123 00000002 8058306f 7c90dcba pcbnew+0x10a7 0023ffc0 7c817077 7e418bd9 7ffde000 7ffde000 pcbnew+0x1123 0023fff0 00000000 00401110 00000000 78746341 kernel32!RegisterWaitForInputIdle+0x49 --- In kicad-users@yahoogroups.com, "lynchaj" <lync...@...> wrote: > > Hi! Sorry to self-reply but the crash seems to be coming from the Wx > libraries for WinXP. The ones I have are from the kicad.1301.cz site and > maybe they are too old? It also mentions OpenGL in the debug log (Dr Watson). > > Maybe that would help? Thanks and have a nice day! > > Andrew Lynch > > --- In kicad-users@yahoogroups.com, "lynchaj" <lynchaj@> wrote: > > > > Hi! Thanks! I reinstalled Wings3D with the latest stable version (1.2) and > > that did not fix the problem. I still get application crashes when I use > > PCBnew to view a 3D image of a PCB. > > > > This used to work for me quite a while ago however it has been broken since > > I think the latest KiCAD stable version came out. I'll try upgrading to the > > latest KiCAD from the development files and see if that helps. > > > > Thanks and have a nice day! > > > > Andrew Lynch > > > > --- In kicad-users@yahoogroups.com, Andy Eskelson <andyyahoo@> wrote: > > > > > > Has this ever worked? > > > > > > The 3D uses Wings3D, have you installed / checked that ? > > > > > > I have sometimes had a few problems with screen resolutions, not usually > > > generating a crash, but sometimes the screen can blank and stay that way. > > > Caused by the res settings in the driver having a mismatch between the > > > actual screen res available. > > > > > > RivaTuner is a useful utility that allows you to edit the driver to only > > > include what the screen can do or limit the choices. > > > > > > Andy > > > > > > > > > > > > On Sun, 13 Jun 2010 03:47:06 -0000 > > > "lynchaj" <lynchaj@> wrote: > > > > > > > Hi! I am running WinXP with the latest KiCAD from windows binary at > > > > kicad.1301.cz. > > > > > > > > Everytime I try to get a 3D view of a PCB in PCBnew, the program > > > > crashes and get the Windows crash window. This is the error it is > > > > reporting: > > > > > > > > AppName: pcbnew.exe AppVer: 0.0.0.0 ModName: wxmsw28u_gcc_custom.dll > > > > ModVer: 2.8.10.0 Offset: 00043720 > > > > > > > > I have made sure the latest KiCAD and libraries are installed per the > > > > KiCAD.1301.cz site. > > > > > > > > Would anyone help me figure out what is wrong? I've searched on the > > > > problem but nothing so far. > > > > > > > > Thanks and have a nice day! > > > > > > > > Andrew Lynch > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > Please read the Kicad FAQ in the group files section before posting > > > > your question. > > > > Please post your bug reports here. They will be picked up by the > > > > creator of Kicad. > > > > Please visit http://www.kicadlib.org for details of how to contribute > > > > your symbols/modules to the kicad library. > > > > For building Kicad from source and other development questions visit > > > > the kicad-devel group at > > > > http://groups.yahoo.com/group/kicad-develYahoo! Groups Links > > > > > > > > > > > > > > > > > >
