Ok cheers I know 1mm heigh is smallest elektorpcb will take But mentions nothing regards text thickness
John --- In kicad-users@yahoogroups.com, "nickoatley" <nickoat...@...> wrote: > > I've had a board made with silkscreen at 0.15mm width, 0.8mm height, 0.8mm > width for some small text. Turned out to be just about ok. Certainly > wouldn't want to go less than that on any of those dimensions though. > > Nick. > > --- In kicad-users@yahoogroups.com, "Seroxatmad" <seroxatmad@> wrote: > > > > > > > > --- In kicad-users@yahoogroups.com, "Seroxatmad" <seroxatmad@> wrote: > > > > > > Hi > > > > > > The symbols I am creating for the components I have set the height as > > > 1.27mm and thickness of 0.15mm > > > > > > The text looks fine on screen but was after some advise mainly about the > > > thickness - will this be OK for PCB production? > > > > > > Cheers > > > > > > John > > > > > Just to add I noticed the thickness is about 1/4 of the height. > > Has anyone had a PCB produced using this 1:4 ratio or the 1:8 I was > > thinking of using. > > > > Cheers > > > > John > > >