Peter, some machines have management ports which will allow you to get a console. HP, Dell and others have such ports. If you are lucky enough to have something like that, then you are in luck. Beyond that, your going to need at least a keyboard.
Starting to wonder if you actually own this target :) -C ________________________________ From: [email protected] [[email protected]] on behalf of Peter Allen [[email protected]] Sent: Thursday, February 24, 2011 5:07 PM To: 'Discussion list about Kickstart' Subject: RE: boot cd-rom network install on system with no display using vnc What if the OS destination machine has no keyboard or monitor?? Peter ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of James Harrison Sent: Thursday, February 24, 2011 11:52 AM To: Discussion list about Kickstart Subject: Re: boot cd-rom network install on system with no display using vnc Hi, Start by running a vncviewer in listen mode (I use realvnc: vncviewer --listen from a command line ). Boot the machine to install linux with the cd-rom and you type: linux ip=xx.xx.xx.xx netmask=xx.xx.xx.xx dns=xx.xx.xx.xx gateway=xx.xx.xx.xx vnc vncconnect=xx.xx.xx.xx vncpassword=abcdef method=cdrom keymap=us lang=en_US.UTF-8 You need to specify IP, method, keymap and lang information otherwise it will ask you for this before vnc is running. the ip address is the address you want to give to the machine your installing linux on. Can also be ip=dhcp vncconnect is the IP address you ran the vncviewer on vncpassword is the password. Not sure if it should be encrypted or mot method=cdrom specify your install media By booting from a cd-rom you unfortunately have to perform a media check. This requires output to a screen and a few key presses and I don't know if this can be disabled. The way I got round this was to use an NFS server, so the boot line is: linux ip=xx.xx.xx.xx netmask=xx.xx.xx.xx dns=xx.xx.xx.xx gateway=xx.xx.xx.xx vnc vncconnect=xx.xx.xx.xx vncpassword=abcdef \ method=nfs:xx.xx.xx:/{PATH TO LINUX_DISTRO EXPORTED FROM NFS SERVER} keymap=us lang=en_US.UTF-8 eg, method=nfs:10.2.34.123:/export/RHEL5.4/i386 /export/RHEL5.4/i386 is the path on the NFS server to the DVD distribution on disk. You have to copy the contents of the DVD to disk. Heres a useful web page: http://www.redhat.com/magazine/024oct06/features/kickstart/ Hope this is of some help. James ________________________________ From: Peter Allen <[email protected]> To: [email protected] Sent: Thu, February 24, 2011 1:00:18 PM Subject: boot cd-rom network install on system with no display using vnc Does anyone know how to do this? Thanks Peter
_______________________________________________ Kickstart-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/kickstart-list
