Hi Essam,

Well, I have observed such a behaviour of the WebUI when for some reason the 
versions of KIM-api.jar under the $TOMCAT_HOME/webapps/KIM/WEB-INF/lib 
folder and the one under $KIM_HOME folder are different. this could usually 
happen if you had a previous version of KIM installed and during the new 
install didn't let the installator re-configure the WebUI (replace old files 
and configurations under Tomcat).

Please, try the following steps:
1) stop your Tomcat
2) delete KIM.war and the KIM folder under $TOMCAT_HOME/webapps
3) clear the cache in $TOMCAT_HOME/work
4) get KIM.war from "$KIM_HOME/KIM Clients" and copy to $TOMCAT_HOME/webapps
5) make sure $TOMCAT_HOME/webapps/kwebui.config file is configured properly
6) start again your Tomcat (Sesame and KIM must be already running)

HTH,
Ilian

----- Original Message ----- 
From: "Essam Elsherif" <[EMAIL PROTECTED]>
To: "Ilian Kitchukov" <[EMAIL PROTECTED]>; <[email protected]>
Sent: 02 November 2006, Thursday 22:47
Subject: Re: [KIM-discussion] Entity Type List is Empty


Hi Ilian,
The version number is displayed. However, I see error in tomcat log 
(attached).

Thanks for you help,
Essam


----- Original Message ----
From: Ilian Kitchukov <[EMAIL PROTECTED]>
To: Essam Elsherif <[EMAIL PROTECTED]>; [email protected]
Sent: Thursday, November 2, 2006 2:06:42 PM
Subject: Re: [KIM-discussion] Entity Type List is Empty


Hi Essam,

This is not a usual behaviour. Please, notice if the home page of you WebUI
displays some info at its bottom like:

Version Info:
KIM Platform: [1.6.8.14] KIM Server: [1.6.8.14] KB Version: [1.3s.8.5]

If it's missing then it means KIM Server couldn't be connected for some
reason. But then most parts of the WebUI won't work too. Which is probably
not the case. So, I will ask you to have a look at the KIM's logs and at
Tomcat's too and send them to me if there's anything unusual or suspicious
in there.

HTH,
Ilian

----- Original Message ----- 
From: "Essam Elsherif" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: 01 November 2006, Wednesday 18:59
Subject: [KIM-discussion] Entity Type List is Empty


Hi,
I have installed KIM, and performed all steps as described including
populating the document store. I am not able to do any entity search. The
Entity Type list in the Entity Lookup is empty. If I search for a known
entity I get the KIM server and Sesame server problem message with
redirection.

Any help is appreciated.

Thanks,
Essam Elsherif



__________ NOD32 1.1849 (20061102) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com




--------------------------------------------------------------------------------


> _______________________________________________
> NOTE: Please REPLY TO ALL to ensure that your reply reaches all members of
> this mailing list.
>
> KIM-discussion mailing list
> [email protected]
> http://ontotext.com/mailman/listinfo/kim-discussion_ontotext.com
>
>
> __________ NOD32 1.1849 (20061102) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>



__________ NOD32 1.1850 (20061102) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com



_______________________________________________
NOTE: Please REPLY TO ALL to ensure that your reply reaches all members of this 
mailing list.

KIM-discussion mailing list
[email protected]
http://ontotext.com/mailman/listinfo/kim-discussion_ontotext.com

Reply via email to