Hi DanKo, Thank you for your answer. It's not came late because I have worked on some other things in the meantime. This is very usefull for me. You were right about this. Steps 5,6 and 7 you suggested me were the solution for my problem. I didn't take care about the visibility.nt because I thought it is used for IE plugin, and I don't use it. Class labels is something that I didn't thought as important, so I didn't put it on each class I use. Thank you for this help, It save me a lot of tedious work. Zoran
--- On Mon, 9/29/08, DanKo <[EMAIL PROTECTED]> wrote: From: DanKo <[EMAIL PROTECTED]> Subject: Re: [KIM-discussion] change recognized entity in content To: "Zoran Jeremic" <[EMAIL PROTECTED]>, [email protected] Date: Monday, September 29, 2008, 7:18 AM Hi Zoran, Are you still there :) ? I've made some tests with you ontology and succeeded to get 2 annotations of the following text: Here is the Abstract Factory that we used. It is a small abstract factory infact. Here is the list of things I have done (and you should check): 1) cleared the content of the "...\kb\owl\" folder and loaded it with the files you sent me. 2) put the "depths.nt" file into the "...\kb\" folder. 3) modified the "sesame.inmem.conf" with the following: <param name="imports" value= "kb/owl/owl.rdfs; kb/owl/protons.owl; kb/owl/protont.owl; kb/owl/protonu.owl; kb/visibility.nt; kb/wkb.nt; kb/wkbx.nt; kb/depths.nt; kb/owl/GoFForm.owl; kb/owl/kimdepths.owl; kb/owl/kimlo.owl; kb/owl/kimso.owl; kb/owl/owl.rdfs; kb/owl/PatternCollectionRegistry.owl; kb/owl/PatternCollections.owl; kb/owl/PFOWLForm.owl; kb/owl/PLForm.owl; kb/owl/PLoPForm.owl; kb/owl/POSAForm.owl; kb/owl/protonkm.owl;"/> <param name="defaultNS" value= "http://www.w3.org/2002/07/owl#; http://proton.semanticweb.org/2006/05/protons#; http://proton.semanticweb.org/2006/05/protont#; http://proton.semanticweb.org/2006/05/protonu#; http://www.ontotext.com/kim/2006/05/wkb#; http://www.ontotext.com/kim/2006/05/wkb#; http://www.ontotext.com/kim/2006/05/wkb#; ; ; ; ; ; ; ; ; ; ; ; ; ;"/> 4) modified the "install.properties" file with the following: com.ontotext.kim.KIMConstants.ENTITY_CASE_TYPE=caseinsensitive 5) modified the "...\kb\visibility.nt" file adding at the end these two lines: <http://cse.unl.edu/~scotth/SWont/Patterns/PLForm.owl#PLForms> <http://www.ontotext.com/kim/2006/05/kimso#visibilityLevel1> "" . <http://cse.unl.edu/~scotth/SWont/Patterns/GoFForm.owl#GoF_Form> <http://www.ontotext.com/kim/2006/05/kimso#visibilityLevel1> "" . 6) added a "label" to the definition of class "PLForms". It looks like this: <owl:Class rdf:about="#PLForms"> <rdfs:label>PLForms</rdfs:label> .......................................................... 7) added a "label" to the definition of class "GoF_Form". It looks like this: <owl:Class rdf:ID="GoF_Form"> <rdfs:label>GoF Form</rdfs:label> .......................................................... 8) Finally I restarted the servers anf got a nice annotation of the two forms - "Abstract Factory" and "abstract factory" Probbably steps 7) and 8) are the most possible cause. Putting a lable to you extending classes is something which can be found in the examples but is not emphasized as an important element. We will add it to the documentation we are cooking now. Write back if things does not work like this at your side. Greetings! DanKo, senior developer, KIM ----- Original Message ----- From: Zoran Jeremic To: [email protected] ; DanKo Sent: Tuesday, September 16, 2008 2:13 PM Subject: Re: [KIM-discussion] change recognized entity in content Hi Danko, Please find attached all ontologies that I use, as well as knowledge-base. In this case I have used class GoF_Form defined in GoFForm.owl. Among other instances I have, for example, created AbstractFactory with alias labeled as "Abstract Factory". This instance is found when I annotate documents or web pages, but I want to annotate "Abstract factory", "abstract factory" and "abstract Factory" as well as "Abstract Factory". I have one more question for you. Sorry, for so much questions. My application (Java RMI client uses KIM server) annotates web pages that describes design patterns. These pages usually describes only one design pattern, but could contain instances of other patterns as well, that are related patterns, or just a references to other patterns. My idea is to check if some instance is found in the page title ( between <title>...</title> tags). This could indicate that this web page describes some specific design pattern, so my application could suggest students to use this web page as relevant for some design pattern. Do you have any suggestions about how to solve this. Thank you for your patience, Zoran --- On Tue, 9/16/08, DanKo <[EMAIL PROTECTED]> wrote: From: DanKo <[EMAIL PROTECTED]> Subject: Re: [KIM-discussion] change recognized entity in content To: [EMAIL PROTECTED], [email protected] Date: Tuesday, September 16, 2008, 3:38 AM Hi Zoran, Please send me a copy of your extention to the ontology and the knowledge-base with the instances you want to be recognised later Greetings, DanKo ----- Original Message ----- From: Zoran Jeremic To: [email protected] ; DanKo Sent: Thursday, September 11, 2008 8:24 PM Subject: Re: [KIM-discussion] change recognized entity in content Hi Danko, Thank you for your answer. > The one resource which case sensitivity could be manipulated is the >Gazeteer. > Use the parameter: > com.ontotext.kim.KIMConstants.ENTITY_CASE_TYPE=caseinsensitive > in file: > <KIM_HOME>\config\install.properties I have tried this, but in this case I don't get any annotation. Actually, I'm not sure what Gazeteer is. I remmember that I have read about it from your documents, but I can't find that document now, and I don't know if it concern my case. In my application I have extended proton's Topic class with several class from my domain ontology, and all I use to annotate the content are instances of these classes. Zoran --- On Wed, 9/10/08, DanKo <[EMAIL PROTECTED]> wrote: From: DanKo <[EMAIL PROTECTED]> Subject: Re: [KIM-discussion] change recognized entity in content To: [EMAIL PROTECTED], [email protected] Date: Wednesday, September 10, 2008, 4:17 AM Hi Zoran, This mail slipped my attention besides your other troubles :) Here are my comments on your questions: 1) The annotation process is multistaged and complex so the case sensitivity cant be manipulated as a whole. For example the JAPE rules largely rely on detection of Title case words for name recognition. The one resource which case sensitivity could be manipulated is the Gazeteer. Use the parameter: com.ontotext.kim.KIMConstants.ENTITY_CASE_TYPE=caseinsensitive in file: <KIM_HOME>\config\install.properties 2) To make your tag insertion the most easy way is to use the "KIMDocument" structure. You can put in it the text for annotation, then use the method: public KIMDocument execute(KIMDocument doc2) Then the returned document contains the plain text and the corresponding annotations in structured form ("KIMAnnotationSet") Then you will: - cycle through the annotations - pick the text offsets and types - form the replacement tagged fragment - replace the coresponding piece of the document body It is not a very detailed description, so if you find anything vague, please ask me back. Greetings! DanKo senior developer, KIM ----- Original Message ----- From: Zoran Jeremic To: [email protected] Sent: Saturday, September 06, 2008 6:13 PM Subject: [KIM-discussion] change recognized entity in content Hi, I have two questions about using KIM : 1) How can I set KIM annotation not to be case sensitive? 2) I want to annotate the content that is stored in the database and used as the web page content (i.e. discussion forum threads...), to recognize the entities, and change those recognized entities (i.e. Abstract factory) to the hiperlinks like: "<a title="View suggestions" href="/depths/services/online_resources/view_suggestions.php" onclick="this.target='message_3';return openpopup('/depths/services/online_resources/view_suggestions..php', 'message_3', 'menubar=0,location=0,scrollbars,status,resizable,width=800,height=600', 0);">Abstract factory</a>", and then to put this content back in the database. I know it is possible to get event from KIM that some entity is recognized and then using Java to process String and find that entity again and change it, but it would be better if I don't have to traverse the content twice. Do you have some idea how to use KIM for this? Thanks, Zoran _______________________________________________ NOTE: Please REPLY TO ALL to ensure that your reply reaches all members of this mailing list. KIM-discussion mailing list [email protected] http://ontotext.com/mailman/listinfo/kim-discussion_ontotext.com __________ NOD32 3421 (20080906) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com
_______________________________________________ NOTE: Please REPLY TO ALL to ensure that your reply reaches all members of this mailing list. KIM-discussion mailing list [email protected] http://ontotext.com/mailman/listinfo/kim-discussion_ontotext.com
