salamat sa suggestion marv
Marvin Pascual <[EMAIL PROTECTED]> wrote: On Wed, Mar 5, 2008 at 4:03 PM, joan
wrote:
> actually no budget limit and i think para nia for robotic projects.... thou
> murag medyo high-end ra sya for simple programming codes and i bet its the
> interfacing ang gusto siguro nila preparahan
If that is the case then probably you don't need the other specs you
mentioned earlier. If it is for simulation, mas maayo kung i-spread na
ninyo to several clone x86-64bit PC compatible ug makagasto ra siguro
mo between PhP 20k to PhP 30k each node tapos pagdulaan ninyo ang
Beowulf . Based on your previous specs, it
sounds like it was a branded 2U server (Dell) which is expensive.
Pag-setup na lang mo ug clone PC na siguro niani nga specs:
Processor: AMD Phenom
Motherboard: http://tinyurl.com/29ferk or http://tinyurl.com/2haddx
RAM: up to 4GB or 8GB
HDD: Seagate 7200 RPM SATA II
Good luck!
Marvin
_________________________________________________
Kagay-Anon Linux Users' Group (KLUG) Mailing List
[email protected] (http://cdo.linux.org.ph)
Searchable Archives: http://archives.free.net.ph
" Strength does not come from physical capacity. It comes from an indomitable
will. --Mahatma Gandhi "
---------------------------------
Never miss a thing. Make Yahoo your homepage._________________________________________________
Kagay-Anon Linux Users' Group (KLUG) Mailing List
[email protected] (http://cdo.linux.org.ph)
Searchable Archives: http://archives.free.net.ph
