begin quoting Chris O'Brien as of Sun, Sep 30, 2007 at 01:19:16PM -0700: > > I don't want to buy a board and that turns into a paper weight because > > > > I don't know what I'm doing. > > If you're prepared to stump up for a low end JTAG debugger to go with > the development board (example below) then you can't go too far wrong > i.e. you'll be able to dig yourself out of any hole you get into. Note > that even the cheapest JTAG debugger could well cost more than the > price you quoted for the board itself. > > http://www.macraigor.com/wiggler.htm
"The Wiggler does not currently work with Linux." They should have a link: "Inform me when it does (work with Linux)". I'd give 'em an email address for me. Hm... maybe you just need to use someone else's software: http://openwince.sourceforge.net/jtag/ has, as supported hardware: * Arcom JTAG Cable * Altera ByteBlaster/ByteBlaster II/ByteBlasterMV Parallel Port * Download Cable * Xilinx DLC5 JTAG Parallel Cable III * ETC EA253 JTAG Cable * ETC EI012 JTAG Cable * Keith & Koep JTAG Cable * Mpcbdm JTAG Cable * Ka-Ro TRITON (PXA255/250) JTAG Cable * Macraigor Wiggler JTAG Cable ^^^^^^^ -- Should I really be using two colons? Stewart Stremler -- [email protected] http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list
