On Sun, December 9, 2007 9:56 am, Gus Wirth wrote: > Lan Barnes wrote: >> I have a memory of a previous time when I changed things on a Myth box >> with more than one PVR capture card. The remote stopped working; and >> then >> I found a config file which said which card the IR receiver was attached >> to. When I changed that, it worked. >> >> On my new box, everything is now working (YEAA!!) *except* the remote. >> The >> correct lircrc and lirc.conf files are in place, but I think that other >> config needs to be tweaked. The remote has no effect. The keyboard, >> OTOH, >> works wonderfully. >> >> Do any of you Kplug Myth guys know where I need to go on this? > > Since you have two PVR-150 cards, you have two choices for which card to > use for the lirc control. Unless you have some other device selected > like a serial port. Do you know which card lirc is trying to use? > > You can run a quick check by booting but not running MythTV. Then do a : > > $ cat -A /dev/lirc > > You might have multiple /dev/lirc? devices because you have multiple > cards. This is NOT the same as /dev/lircd because /dev/lircd is what you > get after everything gets processed. > > Then try pressing the remote buttons to see if you get any output. That > way you'll make sure you are using the right /dev/lirc? device to start > with. > > Once you identify the correct /dev/lirc? device you might need to make a > small change to the lircd init.d script to make sure it uses the correct > device. > > Gus > >
Thanks. -- Lan Barnes SCM Analyst Linux Guy Tcl/Tk Enthusiast Biodiesel Brewer -- [email protected] http://www.kernel-panic.org/cgi-bin/mailman/listinfo/kplug-list
