That is the timing on the points and is also explained in the manual.
-------- Original Message -------- Subject: Re: KR> Slick mag From: Larry&Sallie Flesner <flesner at frontier.com> List-Post: [email protected] Date: Mon, March 31, 2014 2:12 pm To: KRnet <krnet at list.krnet.org> At 06:47 AM 3/31/2014, you wrote: >There is a tool for internal timing. It looks like a pin. Similar to an >All/scribe tool, only about 2" long. +++++++++++++++++++++++++++++++++++++++++++++++++++ I recall there being one additional timing setup internal in the mag besides the gears that takes a special tool. Also , you need to know the mag rotation direction to select the correct alignment hole. I'd suggest you find someone (A&P, I.A.) that knows how it is done correctly and seek their advise. Mags are too expensive to screw up and trying to troubleshoot a bad setup later would be a pain in the , you know where....... Larry Flesner _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
