Gary Robison wrote: > Hey Mark can you share the printout for the VW timing > wheel I see on your website??
Sure, it's at http://www.n56ml.com/n891jf/2180/degree_wheel.pdf . Disregard IVO/IVC/EVO/IVO stuff though (valve openings), as they are leftovers from the Corvair timing disk that I made the VW one from. This is sized to fit the SAE 1 prop hub size (5" diameter). I ran the 2180 for over an hour this weekend, and it's plenty healthy, turning 3600 rpm static, which is pretty mind-blowing considering it would only do 2990 rpm in flight wide open, with the same prop! I'm almost there... Mark Langford ML at N56ML.com website at http://www.N56ML.com --------------------------------------------------------
