I have a roll of Norton 40x Resinall Metalite Cloth 29 inches wide and 80
ft. long.If anyone would like to have some for sanding,contact me off the
net.Tommy Waymack Pine Bluff,Arkansas


On Fri, May 16, 2014 at 10:11 AM, Wayne Tokarz via KRnet <
krnet at list.krnet.org> wrote:

> I also build R/C planes and the hobby shops sell sandpaper on the roll for
> about 5 -7$ It has a sticky back and you can stick it to almost anything,
> angle iron/aluminum, edge of 2 X 4, etc. worked great for me.
>
> Wayne
>
> -----Original Message-----
> From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of
> ppaulvsk at aol.com via KRnet
> Sent: May-16-14 8:07 AM
> To: via KRnet
> Subject: Re: KR> Sanding Blocks
>
> That's a good idea and its cheaper than the floor sander paper.
>
> Paul Visk
> Bellev
>
> Sent from my HTC on the Now Network from Sprint!
>
> ----- Reply message -----
> From: "via KRnet" <krnet at list.krnet.org>
> Date: Fri, May 16, 2014 7:21 am
> Subject: KR> Sanding Blocks
> To: "Adam Tippin" <adamtippin at gmail.com>, "KRnet" <krnet at list.krnet.org>
>
> Another suggestion that I used is the stuff they sell to keep you from
> slipping - comes rough and has a sticky back.
> Paul N7970K
> ----- Original Message -----
>
> From: "Adam Tippin via KRnet" <krnet at list.krnet.org>
> To: "KRnet" <krnet at list.krnet.org>
> Sent: Thursday, May 15, 2014 10:38:47 PM
> Subject: Re: KR> Sanding Blocks
>
> Little late but just found your email in spam folder.
> Rap the sand paper around three sides and staple the two sides that you
> don't intend to use.
> On Apr 26, 2014 7:01 PM, <PPaulVsk at aol.com> wrote:
>
> >
> > Any suggestions on sanding blocks. I made a 4ft board for my
> > horizontal stabilizer out of a straight 2x4. I'm having problems
> > keeping the sandpaper on
> >  the board. I used contact cement and that's not seem to hold and when
> > the edges  peal up it digs into the foam. I'm at the start of a lot of
> > sanding and I figure  there's a LOT of experience out there with
> > sanding.  I could definitely use  some suggestions.
> > Thanks
> >
> >
> > Paul  Visk
> > Belleville Il.
> > 618-406-4705
> > _______________________________________________
> > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> > please see other KRnet info at http://www.krnet.org/info.html
> > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to
> change
> > options
> >
> _______________________________________________
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
> options
>
> _______________________________________________
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
> options
> _______________________________________________
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
> options
>
>
> _______________________________________________
> Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
> To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
> please see other KRnet info at http://www.krnet.org/info.html
> see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
> options
>

Reply via email to