I get 1/4" nylaflow and others, from both AS and Wicks. You need to know what the ID is and they come in various wall thicknesses.
See N64KR at <http://krbuilder.org/> http://KRBuilder.org - Then click on the pics Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best KR at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Interior at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Paint at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Firwwall Forward at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Interior and Panel at 2008 ? KR Gathering in Mt. Vernon, Il - MVN Daniel R. Heath - Lexington, SC -----Original Message----- From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Paul Visk via KRnet Sent: Tuesday, July 29, 2014 7:26 PM To: KR EMAIL BOARD Subject: KR> Elevator trim hinge Does anyone have a source for some 1/4" tubing and the rod that goes into it for the hinge on the elivator trim tab. I"ve looked in some hobby stores. But all I can find is 5/32" with a rod that would fit into it. The plans call for 1/4". Paul Visk Belleville Il 618 406 4705 Sent on the new Sprint Network from my Samsung Galaxy S?4. _______________________________________________ Search the KRnet Archives at <http://tugantek.com/archmailv2-kr/search> http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to <mailto:KRnet-leave at list.krnet.org> KRnet-leave at list.krnet.org please see other KRnet info at <http://www.krnet.org/info.html> http://www.krnet.org/info.html see <http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org> http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
