Mark has alot of good pictures about his alignment on his website. ? Here's the link to it. ?
http://www.n56ml.com/kgear.html Paul Visk Belleville Il 618 406 4705 Sent on the new Sprint Network from my Samsung Galaxy S?4. <div>-------- Original message --------</div><div>From: Dave_A via KRnet <krnet at list.krnet.org> </div><div>Date:11/01/2014 10:40 PM (GMT-06:00) </div><div>To: Sid Wood <smwood at md.metrocast.net>,KRnet <krnet at list.krnet.org> </div><div>Subject: Re: KR> Gear Leg Replacement Progress </div><div> </div>How did you align the wheels? Was there any sort of fixture you used? I am going through something similar.... On 10/29/2014 10:45 AM, Sid Wood via KRnet wrote: > This past weekend I set the 0-degree toe for my main wheels, clamping > firmly with 4 C-clamps on each wheel bracket. That exercise only took > 4 hours. Removed the gear legs and matched drilled through the > original wheel brackets as Larry had advised; used a drill press for > that operation. Yesterday I applied 2 BID fiberglass per the Diehl > instructions. (I suppose Dan Diehl may want to distance himself > somewhat from my latest gear leg creation.) Used several plastic soda > straws for conduits for the hydraulic brake lines. Today put on some > micro anticipating finishing and painting. > Got the back-ordered brake bleeder valves from ACS; will replace the > scuffed bleeders while waiting for the epoxy to cure. > Yes, the brake slave cylinders will bleed more easily if the bleeder > valve is at the low point, but being down low will subject them to > more runway pavement abuse. > > Sid Wood > Tri-gear KR-2 N6242 > Mechanicsville, MD, USA > > > > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to > change options _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
