I started with a belly board that had no holes in it and then I made one with
holes. The brake w/holes works better. I believe that is because with out holes
the board creates some lift.Kenny N6399U
On Sunday, November 30, 2014 8:25 AM, Dan Heath via KRnet <krnet at
list.krnet.org> wrote:
It is a mystery.? Mine had no holes and performed very well.? No holes is
easier to implement, so, for me it seemed to be the most logical choice.? I
use an electric servo that I got from Steve Glover.? It has an automatic
stop at both ends of the throw.? I started out with a momentary switch so I
could put it down a little at a time.? However, found that full throw was
always what I needed, so changed it out for simplicity.? Switch down, board
down, switch up, board up.
Manual activation may be better, but it takes up precious room in the
cockpit, so I never considered that option.
See N64KR at? <http://krbuilder.org/> http://KRBuilder.org - Then click on
the pics
2105 KR Gathering - McMinnville, OR.? September 3 - 6 -- See U There.
Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN
Best KR at 2013 - KR Gathering in Mt. Vernon, Il - MVN
Best Interior at 2013 - KR Gathering in Mt. Vernon, Il - MVN
Best Paint at 2013 - KR Gathering in Mt. Vernon, Il - MVN
Best Firwwall Forward at 2013 - KR Gathering in Mt. Vernon, Il - MVN
Best Interior and Panel at 2008 - KR Gathering in Mt. Vernon, Il - MVN
Daniel R. Heath - Lexington, SC
-----Original Message-----.......Can anyone of the experienced
"bellybrakers"explane ,what kind of bellybrake are the most efficent? brake
is.
.....Is it useful to make holes in the brakeshield or not ?
....what is the most efficent deploying angle of the board ?
_______________________________________________
Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search.
To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
please see other KRnet info at http://www.krnet.org/info.html
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options
