At 09:43 AM 7/1/2015, you wrote: >Hi netters, >I am at the way to install the rudder cables >What is your ideas? ++++++++++++++++++++++++++++++++++++++
In the photo https://dl.dropboxusercontent.com/u/32133949/IMG_8717.JPG you can see the forward half of the cables as they pass through the cockpit. The next fare lead is vertical of the rear spar or an inch or two to the rear. I cut nyla-flo brake tubing and slipped it over the cable between the fare leads. If you cut the tubing with a razor it tends to make a spiral cut which works great to keep the tubing on the cable. The tubing is larger than the hole in the fare lead so it stays in place. 500+ hours and I've never felt the cable during flight or ground handling. Keep it simple. Larry Flesner
