I installed mine 4" from the flange and at 2950 rpm, ran it around 1450. If it went above that, I richened it. The engine runs good lean of peak, but I did not make a habit of running it there.
See N64KR at <http://krbuilder.org/> http://KRBuilder.org - Then click on the pics 2015 KR Gathering - McMinnville, OR. September 3 - 6 -- See U There. Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best KR at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Interior at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Paint at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Firwwall Forward at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Interior and Panel at 2008 - KR Gathering in Mt. Vernon, Il - MVN Daniel R. Heath - Lexington, SC -----Original Message----- From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Bob Sauer via KRnet Sent: Sunday, July 05, 2015 6:40 PM To: KRnet at list.krnet.org Cc: Bob Sauer Subject: KR> Corvair EGT What EGT readings are a good range for the 2700 Corvair engine? Bob Sauer Sun City West, AZ N811RJ KR2S _______________________________________________ Search the KRnet Archives at <http://tugantek.com/archmailv2-kr/search> http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to <mailto:KRnet-leave at list.krnet.org> KRnet-leave at list.krnet.org please see other KRnet info at <http://www.krnet.org/info.html> http://www.krnet.org/info.html see <http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org> http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
