Hi mark, We did the wings and the lower part of the fuselage with micro. In a few weeks we will start to finish everything. Do you have a brand name of the icing, google come up with 3M. Is that the lightweight stuf? Monday we will do a weight and balance check To calculate the engine position. En start with the engine mount. So my dad will start sending, I do de mount. Stef
-- Steph and his dad are building the KR-2S see http://www.masttotaalconcept.nl/kr2 >----Origineel Bericht---- >Van : krnet at list.krnet.org >Datum : 14/08/2015 21:31 >Aan : krnet at list.krnet.org >Cc : flykr2s at charter.net >Onderwerp : KR> Filling low spots > >Hi Guys, >When I was building, Bill Clapp told me about a filling product used in the >automotive paint shops called ?Icing?. This is a two part filler. It is >absolutely the easiest filler I have ever sanded. It is super lightweight and >will feather out on the edges exceptionally well. I used it all over my KR. It >goes a long way so if you decide to try it buy the smallest tube which is >about 24 ounces. It cost about $25. >Try it, you will be glad you did. > >Mark Jones (N886MJ) >Stevens Point, WI > >E-mail: flykr2s at charter.net >Web: www.flykr2s.com > >_______________________________________________ >Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. >To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org >please see other KRnet info at http://www.krnet.org/info.html >see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change >options >
