At 05:24 PM 10/20/2015, you wrote: >I'm searching or some tie down attach points. What have you KR builders >found to work well? What was used and where/how installed? >Thanks, >Gary >++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If you look at the photo https://dl.dropboxusercontent.com/u/32133949/100_5553.JPG you will see at the end of the wing the 1/8" steel strap that is permanently mounted to the ends of the main spar caps, in line with the airflow for little or no drag. The strap covers both spar cap ends inside the wing with a 3/16" bolt epoxied lengthwise into the end of the cap approximately 2 1/2" long. I figure if winds are strong enough to rip out the ends of the spar caps and sheer web the KR is probably toast by then anyway. Larry Flesner
