I had one built into a Westach quad gauge and really liked it. I used one of their automotive 2" gauges while they were custom building the quad for me. I think I still have it somewhere. They will also build you one in a 2 1/4 aircraft gauge if you ask.
-------- Original Message -------- Subject: Re: KR> LED bar vs needle for AFR gauge From: JL via KRnet <krnet at list.krnet.org> List-Post: [email protected] Date: Tue, November 03, 2015 2:17 pm To: KRnet <krnet at list.krnet.org> Cc: JL <schmleff at gmail.com> I am using the same one. I find that I cannot see the LED's in flight due to the sun. Jeff Lange Sent from my iPhone > On Nov 3, 2015, at 12:39 PM, Sid Wood via KRnet <krnet at list.krnet.org> > wrote: > > Craig, > I am using a 2-1/8 inch round AFR gauge that has both a LED bar wrapped > around the edge with a digital number in the center. The LEDs dance around a > bit as do the numbers even with a constant RPM and throttle setting. Wish > there was more damping, but both displays are useful for setting the mixture, > no muse, no fuss. My O2 sensor is on one cylinder exhaust pipe on the 2180 > VW. So, the read out is for that one cylinder; just have to believe the other > three are doing the same thing. > http://www.jegs.com/webapp/wcs/stores/servlet/KeywordSearchCmd?Nty=0&catalogId=10002&Ntk=all&Ne=1%2b2%2b3%2b13%2b1147708%2b1147708&langId=-1&itemPerPage=60&storeId=10001&N=4294961159&Ntt=afr+gauge > > Sid Wood > Tri-gear KR-2 N6242 > Mechanicsville, MD, USA > -- _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
