Jeff,
Thank you. I see that one of the distributors is one that I found, but did not know that they carried the kind I was looking for. I sent a RFI to them yesterday. I will call them on Monday. I really appreciate this information. See N64KR at <http://krbuilder.org/> http://KRBuilder.org - Then click on the pics 2015 KR Gathering - McMinnville, OR. September 3 - 6 -- See U There. Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best KR at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Interior at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Paint at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Firwwall Forward at 2013 - KR Gathering in Mt. Vernon, Il - MVN Best Interior and Panel at 2008 - KR Gathering in Mt. Vernon, Il - MVN Daniel R. Heath - Lexington, SC -----Original Message----- From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Jeff Scott via KRnet Sent: Saturday, November 21, 2015 5:05 PM To: krnet at list.krnet.org Cc: Jeff Scott Subject: Re: KR> Anchor Nuts/Blind Nuts/Nut Plates Dan, What you are looking for is are A286 Nutplates. They are made of Stainless Steel with Cad or Silver plating to avoid galling. < <http://www.spstech.com/fastener_finder/?action=parts_orig&cid=4&style=All&t ype=26&material=A286> http://www.spstech.com/fastener_finder/?action=parts_orig&cid=4&style=All&ty pe=26&material=A286> Numerous suppliers are listed on the web site at < <http://www.spstech.com/distributors/> http://www.spstech.com/distributors/>. And yes, these are Aircraft grade. My experience with RivNuts is that you will eventually end up cutting off the stainless screw that gets galled in it and drilling out the rivnut. I won't use them in aircraft. -Jeff Scott Los Alamos, NM > Sent: Saturday, November 21, 2015 at 6:01 AM > From: "Dan Heath via KRnet" < <mailto:krnet at list.krnet.org> krnet at list.krnet.org> > To: 'KRnet' < <mailto:krnet at list.krnet.org> krnet at list.krnet.org>, 'CorvAircraft' > < <mailto:corvaircraft at list.corvaircraft.org> corvaircraft at list.corvaircraft.org> > Cc: "Dan Heath" < <mailto:danrh at windstream.net> danrh at windstream.net> > Subject: KR> Anchor Nuts/Blind Nuts/Nut Plates > > I need to find some of these that are not Magnetic. I need to use > them in an area near my magnetometer, where there can be no material > that will draw a magnet. > > > > The only thing I have been able to find is an aluminum countersink > rivnut, which is difficult to install and un-reliable as it can be > easily dislodged and will be very difficult to install a new one in its place. > > > > Your advise is appreciated. > > > > My Panther Building Documentation at < <http://pantherbuilder.org/> http://pantherbuilder.org/> > PantherBuilder Web Site > > > > Daniel R. Heath - Lexington, SC > > > > _______________________________________________ > Search the KRnet Archives at <http://tugantek.com/archmailv2-kr/search> http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to > <mailto:KRnet-leave at list.krnet.org> KRnet-leave at list.krnet.org please > see other KRnet info at > <http://www.krnet.org/info.html> http://www.krnet.org/info.html see > <http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org> http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > _______________________________________________ Search the KRnet Archives at <http://tugantek.com/archmailv2-kr/search> http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to <mailto:KRnet-leave at list.krnet.org> KRnet-leave at list.krnet.org please see other KRnet info at <http://www.krnet.org/info.html> http://www.krnet.org/info.html see <http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org> http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
