?That should have said "good clamp design". You do want even pressure over the entire firewall. With were the firewall is there is no obvious place to clamp it down. ? I have seen pictures of builders shaving a little off the front of the frame with a router to get a perfect glue joint with the fire wall.
You always want to let the epoxy soak into both surfaces before lightly clamping down.? And if you get squeeze out, you know your joint is not starved Paul Visk?Belleville IL ?618 406 4705 Sent on the new Sprint Network from my Samsung Galaxy S?4 -------- Original message -------- From: Larry Flesner via KRnet <krnet at list.krnet.org> List-Post: krnet@list.krnet.org Date: 09/08/2016 6:56 PM (GMT-06:00) To: KRnet <krnet at list.krnet.org> Cc: Larry Flesner <flesner at frontier.com> Subject: Re: KR> Attach Wood firewall to frame What is a "pic limping" design?? Also,? when using epoxy you don't?Larry
