I have a KR - 1 that I am going to part out this spring. It has a VW engine on it. Not damaged or anything, just neglected for the most part. Not all rusted though either. I wont be able to get back to it till mid March though. As far as the chrome moly tubing goes, Aircraft Spruce and Wicks Aircraft are suppliers besides others. There is some Chinese steel floating around, I wouldn't trust it myself, especially on something like a motor mount. Jim Chuk
On Wed, Dec 7, 2016 at 5:01 PM, Randy Smith via KRnet <krnet at list.krnet.org> wrote: > Find another supplier. > > On Wednesday, December 7, 2016 3:24 PM, Dean Choitz via KRnet < > krnet at list.krnet.org> wrote: > > > hate to look to stupid but our local iron supplier has never heard of > 4130 iron/steel need to order some material to make a longer mount for cg. > question cg 4 inches from leading edge to 14 from leading edge is that what > most builders are shooting for thanks dean choitz > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org >
