Larry is correct that the bolts alone are enough. I have over 200 landings on mine this way with no movement or issues.
Also an added benefit of not glueing the brackets to the spar will allow any future decisions to change from tail dragger to nosewheel configuration or vice versa. This assumes you drill the bracket holes in both brackets at the same time (so they are identical.) The brackets move to the rear of the spar and then swap sides, in the nosewheel configuration Chris Gardiner CGKRZ Sent from my iPad > On Dec 8, 2016, at 5:36 PM, Larry Flesner via KRnet <krnet at list.krnet.org> > wrote: > > At 11:28 AM 12/8/2016, you wrote: >> Is the Diehl landing gear glued and bolted to spar? Do the bolts alone >> prevent any slip/movement between bracket and spar? >> *Gary * > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org
