Howdy! I'm building a KR-1 but it should answer your question. The (on the -1) rear wing attachment fittings are bent 3 degrees. Naturally you would bevel the wing spar end to mate with the fixed spar. I can see the confusion where you might think you're bending the spar itself, but no, just the fiting. Hope this helps.
-------Original Message------- From: KR builders and pilots List-Post: [email protected] Date: Thursday, May 08, 2003 2:40:40 AM To: KR builders and pilots Subject: Re: KR>out board wing question Pat. Do you mean the spar is warped ( bent) or it slops forward at the tip I'm just doing my winskins too, the rear spar should be 22 1/4 inches from the centre of the main spar to the centre of the rear spar at their tips. Phil Matheson [email protected] See our VW Engines and Home built web page at http://www.vw-engines.com/ www.homebuilt-aviation.com/ _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html .
