Dana, You can Cut it but you need to seal the cut end with silicone or equivelent. The best place I found for this stuff is http://www.elwirecheap.com You can get it in different colors and thicknesses. I am using the blue/green tape instead of the wire version. See http://n323xl.iwarp.com/blinstpanel5.htm
Dave Mullins Nashua, New Hampshire http://n323xl.iwarp.com Dana Overall wrote: > > No you cannot cut it but I just lite it up and ran a 180 around the tip of > my little finger. I got a little braver and pinched it down to about 3/8" > with not problem. I don't want to kink it so I didn't squeeze any tighter. > > Dana Overall > 1999 & 2000 National KR Gathering host > Richmond, KY > RV-7 slider/fuselage > http://rvflying.tripod.com > do not archive > > >From: "Ron Freiberger" <rfreiber...@swfla.rr.com> > >Reply-To: rfreiber...@swfla.rr.com, KR builders and pilots > ><kr...@mylist.net> > >To: "KR builders and pilots" <kr...@mylist.net> > >Subject: RE: KR>Lighting up your KR > >Date: Fri, 13 Jun 2003 15:16:22 -0500 > > > >OK Dana, while we've got your light goin', Can you cut it to a shorter > >piece? > >If not, and I wanted to loop it back, how small a bending radius? > >Thanks > > > >Ron Freiberger > >mailto: rfreiber...@swfla.rr.com > > > > > >Here you go gangs, interior lighting brought to you by the movie The Fast > >and Furious. This is a Electroluminance Stringlight from > > > > > >_______________________________________________ > >see KRnet list details at http://www.krnet.org/instructions.html > > _________________________________________________________________ > Help STOP SPAM with the new MSN 8 and get 2 months FREE* > http://join.msn.com/?page=features/junkmail > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html
