My engine manual clearly shows orings over the 6 case half studs prior mating the 2 halfs together. The manual calls them case stud seals. The only thing these could do is to keep oil from migrating out the studs.
On Tue, 7 Oct 2003 17:12:04 -0400 (Eastern Standard Time) "Dan Heath" <[email protected]> writes: > There are no "seals" for the case studs. I am assuming that you mean > the > studs that hold the heads to the case. > > However, the push rod tubes exit near the studs and it would be my > guess > that the gaskets for those, and possibly the push tubes themselves, > need to > be replaced. Certainly with an engine that old, if you do replace > the > gaskets, you would want to replace the tubes also. > > N64KR > > Daniel R. Heath - Columbia, SC > > [email protected] > > See you in Mt. Vernon - 2004 - KR Gathering > > See our KR at http://KR-Builder.org - Click on the pic > See our EAA Chapter 242 at http://EAA242.org > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html > > ________________________________________________________________ The best thing to hit the internet in years - Juno SpeedBand! Surf the web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today!
