Screws it shall be!!! Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html
----- Original Message ----- From: "KRJerry" <[email protected]> To: <[email protected]>; <[email protected]> Sent: Wednesday, October 15, 2003 9:32 PM Subject: Re: KR>Piano hinge for Cowl Mark, The pop rivets would hold the steel and hinge together quite well, but I would not count on them holding the assembly to the wooden bulkhead. My vote is for the SCREWs......!!! Keep on keepng on, KRJerry Jerry Mahurin Lugoff, SC e-mail: [email protected] Website: http://KR-Builder.org -------Original Message------- From: KR builders and pilots List-Post: [email protected] Date: Wednesday, October 15, 2003 22:25:24 To: KR builders and pilots Subject: Re: KR>Piano hinge for Cowl My thoughts were piano hinge on top of stainless steel firewall on top of plywood. The pop rivet would go through the piano hinge, through the SS firewall then into the plywood firewall. If this is an incorrect way, I will use #4 x 3/4" wood screws. Thoughts..... Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "KRJerry" <[email protected]> .. But if you are talking about pop riveting metal to wood....FORGET IT....!!! _______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html ._______________________________________________ see KRnet list details at http://www.krnet.org/instructions.html
