Rich, The bottom of my mount tray is 6 3/4" from the bottom of the firewall and the back of the tray is 6 1/2" from the firewall as Mark Langford's is. Using the Nissan Sentra 1.6L starter on the rear set up, gives me 1/8" clearance between the starter and the firewall. I do have three bumps on my cowl. One each on the intakes (standard intake pads and not milled) and one for the fuel pump. In all honesty, I was concerned about the looks of the humps at first but once I finished the cowl and modified the humps from the mold I used, they really do not look too bad. Some creative paint work is planned to accent the humps.
Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "Richard Parker" <[email protected]> Sent: Sunday, November 02, 2003 4:27 AM Subject: KR>Corvair Engine Mount > > Can any of you corvair guys tell me the distance from the firewall to the > rear of the the square frame section part of the engine mount and how high > it is mounted from the bottom of the firewall? > > I havent got bushings yet to align the engine on the thrust line and get the > correct distance down to the mount yet I want to get the mount tacked up > today. > > Rich Parker > Peterborough, NH > [email protected] > > _________________________________________________________________ > See when your friends are online with MSN Messenger 6.0. Download it now > FREE! http://msnmessenger-download.com > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html >
