Ron If you haven't mounted your wafs yet you could put them on the outer wings
spars, build them complete to your specications bolt the short wing wafs on
the fittings you already have in place then line them up to the short wings and
drill your holes through the spars and attach them last. That would garrentee
they will fit.
Hope this makes sense---In other words build it backwards
Mike Turner
----- Original Message -----
From: Ron Freiberger
To: KRnet
Sent: Tuesday, November 11, 2003 8:20 AM
Subject: RE: KR>Building wings - Off the plane?
You failed to understand that I don't have enough room to build them that
way.
Ron Freiberger
mailto: [email protected]
-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of
Dan Heath
Sent: Tuesday, November 11, 2003 5:43 AM
To: [email protected]
Subject: KR>Building wings - Off the plane?
I suggest that you build yourself a Flip-O-Matic, ala Mark Langford. You
will need it anyway. You must be building the top side on the plane.
Carefully remove it, flip your plane, turn the wing over, put it back on and
continue on your way. If you don't build it on the plane, you won't be sure
it is right, until it is done. then it is too late.
N64KR
Daniel R. Heath - Columbia, SC
[email protected]
See you in Mt. Vernon - 2004 - KR Gathering
See our KR at http://KR-Builder.org - Click on the pic
See our EAA Chapter 242 at http://EAA242.org
_______________________________________________
see KRnet list details at http://www.krnet.org/instructions.html
_______________________________________________
see KRnet list details at http://www.krnet.org/instructions.html
