Larry Thanks, It's a KR2 with Dan Diehl wing 23 1/3 feet. What are the measurement for a KR2S tail ??????
Phil Matheson [email protected] Australia 61 3 58833588 See our VW Engines and home built Parts and Kits at: http://www.vw-engines.com/ www.homebuilt-aviation.com ----- Original Message ----- From: "larry flesner" <[email protected]> To: "KRnet" <[email protected]> Sent: 06 December 2003 03:01 Subject: Re: KR> H/S spars strenght > At 04:52 PM 12/5/03 +1100, you wrote: > >I have increased my H/Stabilizer spars 12 inches, Some have told me to > >increase the spar size and strength, others say here is no need. > >Any advise would be welcomed > >Phil Matheson > +++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > Phil, > > I'm not an engineer so the answer to that is a bit out of my league. > > I've never heard of a HS failure in the standard KR or any other > structural failure for that matter. The 12 inch extention changes > things though and they might stand a bit of re-inforcemet. > > Are you building a 2 or a 2S? If you are building a 2S I'd stick > with the dimentions called for in the plans. If you are building > a 2 I'd go with the dimention of the 2S and build it to the > 2S plans. I'd not go bigger than the 2S plans. > > Hope that is of some help. > > Larry Flesner > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html >
