You are correct, I used two cans of paint and one partial can of clear Coat....I read the directions....ha..... BTW...when is that first flight going to happen?
Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "larry flesner" <[email protected]> To: "KRnet" <[email protected]> Sent: Friday, December 12, 2003 8:22 PM Subject: Re: KR>Interiors/spatter paint > A little tip, this > >stuff is expensive by the gallon. your Kr should not take more than a pint > >so order the architects sample for a small cost, this should give you more > >than enough. > >Wayne > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > If Wal-Mart, Lowe's, or Home Depot colors will work it should > only take maybe two cans of the color (spatter) and one of the > clear plus your base coat. > > I used more because I "DIDN'T READ THE DIRECTIONS > ON THE CAN". I tried to use just the spatter paint as a cover > paint on the inside of my gullwing door. I had to put in on so > heavy to cover that it had still not dried after 2 or three days > and I scraped it off with a razor. I then "READ THE DIRECTIONS > ON THE CAN", applied the base coat (grey primer in my case), > put on some spatter and finished with the clear. Worked great. > > Your results may vary. It depends on whether you > READ THE DIRECTIONS ON THE CAN" or not. :-) > > Larry Flesner > > > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html
