Mark Jones <[email protected]> wrote:Larry, this is a temporary installation. I do not have front plate yet but will be getting one if available for this spinner and prop thickness. If not, I will try and make one. Ed did not put his label on this prop. Don't know if he forgot to or what.
Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "larry flesner" To: "KRnet" Sent: Saturday, January 17, 2004 9:33 AM Subject: KR>Photo of the Week updated. > At 08:51 AM 1/17/04 -0600, you wrote: > >I have installed my new Ed Sterba 56x64 prop. Here is the link to a photo. > >http://mywebpage.netscape.com/n886mj/photo.html > >Mark Jones (N886MJ) > +++++++++++++++++++++++++++++++++++++++++++++++++++++ > > Mark, > > Nice looking prop. Two things: > > Is Ed no longer putting his stickers on the prop face? > > I notice you have a rear spinner plate but no front plate. > I'd recommend to everyone that whatever spinner you > install that it include a front support plate complete with > screws. I had installed a front support but no screws and > when removed after several hours of running I was amazed > at how much "chaffing" there was inside the spinner from > movement between the spinner and the front plate. I then > mounted blind nuts and screws on the front support also. > > The spinner on the Tripacer is mounted with front and rear > support plate screws and it has been trouble free for 500+ > hours for me and many more before I purchased it. > > O.K., three things. For those that haven't ordered a prop > yet and have your landing lights inside or very near the > prop arc, have the back side of the prop finished in black. > If you don't your lights will create a prop sized, wood > colored arc when they are turned on. Live and learn. :-) > > Larry Flesner > Carterville, Illinois > > > > _______________________________________ > to UNSUBSCRIBE from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/instructions.html > _______________________________________ to UNSUBSCRIBE from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/instructions.html --------------------------------- Do you Yahoo!? Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
