You can get a 100 degree from Spruce for about 7 dollars. See N64KR at http://KR-Builder.org - Then click on the pics
Daniel R. Heath - Columbia, SC [email protected] See you in Mt. Vernon - 2004 - KR Gathering See our EAA Chapter 242 at http://EAA242.org -------Original Message------- From: KRnet List-Post: [email protected] Date: Sunday, February 08, 2004 8:38:53 PM To: [email protected] Subject: Re: KR>Re: KR/ Piano Hinge Dimpling Phillip, Drill and counter sink the holes. I reground a larger size drill bit to the 100 degree angle of the screw heads. Good luck -- Joe Horton > I'm attempting to fit the ailerons Piano Hinge, and concerned with > the > dimpling the hinge. > Did anyone have problems with the metal buckling , or were you able > to clamp > it down to stop the area around the dimple from distorting?? > > Or did you just Countersink ( drill ) the thin Hinge material?? > > Phillip Matheson > [email protected] > Australia Joe Horton Coopersburg, Pa. [email protected] _______________________________________ to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html .
