It may not look pretty, but I've cut some good quality thick-walled clear vinyl tubing to the right length (thickness of firewall) for passing wires and other stuff through a firewall, then sealed it with a high temp. sealant. Not sure whether fire resistance is needed there.
Ed Janssen mailto:[email protected] ----- Original Message ----- From: "Mark Langford" <[email protected]> To: "KR builders and pilots" <[email protected]> Sent: Friday, February 13, 2004 8:10 PM Subject: Re: KR>Rubber Grommets > Can you do the trick in "Firewall Forward" on page 67, where he countersinks > it with a spade bit so it's only 1/16" thick? You've probably thought of > that, but maybe not. > > I'm in the middle of punching a few holes in my firewall as well... > > Mark Langford, Huntsville, AL > N56ML "at" hiwaay.net > see KR2S project at http://home.hiwaay.net/~langford > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html >
